Last Saturday was the first annual poker run to benefit Diabetes Solution of Oklahoma. I was there, working the silent auction table and just helping out in general. I didn't bring my camera, but I did snap a few pictures with my phone. Also, thanks to Sharon (another volunteer) for some of these pictures, as I borrowed them from her facebook album.
Riders lined up early to register for the run. The majority were cruiser riders, though there were a few sport bikes and sport tourers in the mix too.
A group of Honda Goldwings all showed up together, sporting patches on their jackets from the Oklahoma Goldwing Club. I didn't even realize Goldwing riders had their own clubs...
The Thunder Roadhouse, where the run started, is a restaurant and bar, with a custom chopper shop attached. They had some of their bikes out for display.
There was a bit of a lull while the riders were out riding, so I took some of the volunteers for some quick joyrides. That's Casey riding pillion, asking me where she's supposed to hold on.
Boyd was very excited to have the winning bid on one of the silent auction items, a special date night including an 8 hour limo ride, a meal at a fancy restaurant, and a night in the Skervin Hotel, in downtown Oklahoma City. He planned on using it on his upcoming wedding night.
A group of riders posing after finishing the route.
Over all, the Poker run went very well. We had a turn out of just under 100 bikes and raised over $7,000 for Diabetes Solutions. Not bad for a first time.
For the second installment of the Motorcycle Mcgyvering series, I want to talk about the driver's backrest I built for my Majesty. Unfortunately, this one won't really translate to other models of bike since the seat design's won't be the same, but hopefully it'll at least give you an idea of what's possible with harvested parts and a little experimentation.
My original backrest design used the Majesty's "butt pad", raised up on a metal bracket, to serve as a back rest. It worked alright, and looked good, but it lacked lower back support, and left two holes in the seat that were difficult to cover up.
I settled for this set-up for a while, for lack of any better ideas. However, we had replaced the driver's seat in my family's RV, and the headrest from the original seat seemed like an ideal candidate for a new and improved backrest. If you don't have an extra headrest laying around, you could probably find one at an auto salvage yard. I'd imagine many of them would probably just let you have one for free, especially if the upholstery on it is in bad shape. As long the foam on the inside is ok, it will work fine for these purposes.
I reused the bracket from the first backrest. It basically consists of some flat steel from Home Depot, welded together in the shape of an uppercase "I". I asked a local welding shop to do the welds for me. It took them all of 30 seconds to do them, and they didn't even charge me. I bent the vertical portion of the "I" to match the curve of the seat as closely as I could, and drilled holes in the bottom of the "I" to match the holes in the seat. I then drilled holes in the back of the head rest to push a couple carriage bolts through, and fastened the headrest to the top of the bracket.
I used a scroll saw to cut a notch out in the back of the butt pad, to allow room for the bracket. In retrospect, I should have been more careful to remove the vinyl material covering the butt pad before cutting it, then reattached it, instead of trying to pull it out of the way and rewrapping it around the notch. Some electrical tape is currently doing a decent job of covering the edge and holding the cover in place. At some point down the road, I'd like to have both the headrest portion and the butt pad recovered by someone who knows what they're doing.
The headrest originally had a blue fabric covering it. I removed the fabric, and spray painted the foam as a temporary solution until I can get it recovered.
I held the new backrest in place and sandwiched it between the seat and the butt pad, using the bolts built into the butt pad to hold everything in place. (The yellow line across the seat in this picture is evidence of how insane the tree pollen has been this spring)
The new backrest is much more comfortable than the first version, providing both upper and lower back support, and placing me in the proper place on the seat. With the butt pad raised up, I felt like I was sitting too far back, as the padding in the seat gets a little thin towards the very back of the seat. Now the seat works as it was originally designed, plus the addition of the backrest. I think that the result looks professional enough, and it will look even better when I get around to getting everything recovered.
Since my article about the iPhone Helmet Headset, I've been talking with a lot of people about using a phone while riding, especially in regards to safety. In response to what seems to be a fairly heated debate, I'd like to make my own thoughts on the matter clear.
First of all, I've always been critical of people driving with a cell phone to their ear. It's statistically been made pretty obvious that it cuts into your reaction time and distracts you from the road. Using a hands free system helps, but due to the fact that the person on the other end of the line can't see or react to things that the driver can, the driver is still distracted. This rule applies to motorcyclists as well. If you're paying more attention to the voice in your helmet than the road in front of you, there's a pretty good chance you may miss something (or worse, hit something you probably should have missed).
The problem I find with this argument is that it just seems a little too black and white to me. There's definitely a gray area to be considered here. Yes, I will answer my phone if it rings while I'm on the road, but that doesn't mean that I'm chit-chatting about last nights episode of American Idol. I'll answer to tell someone I'm on my way, or get a message about, say, picking up a gallon of milk or a loaf of bread on the way home, but if someone calls me just to chat, or to talk about anything more extensive than a minute long conversation, I always tell them that I'll call them back when I'm not on the road anymore. What I definitely won't do is make an outgoing call while riding. That would require focusing not just some of my attention, but my vision as well, on my phone, and that's a risk I'm not willing to take.
As for those who feel that listening to music while riding is too much of a distraction, how many of you listen to the radio in your car? The DOT, as well as the MSF I believe, actually recommend wearing earplugs while riding to eliminate some of the wind noise. Music is not much different, as far as I'm concerned.
I'd love to hear some other opinions on this one, so please don't hesitate to leave comments.
p.s. I know the guy in my stolen stock photo looks like a real tool. Try not to let that affect your opinion too much...
The Diabetes Solutions first annual poker run, that I mentioned back in February, is coming up, the Saturday after next. If you're in the area, don't forget to register at www.DSOK.net ASAP. The Run will be April 26th, starting at 9:00am at the Thunder Road House Cafe. I'll be there and I'd love to talk to some readers if you're coming, so don't be afraid to say hi.
This is the first of what I hope to be a series, about homemade gadgets, gizmos, and dohickeys, made in true Angus MacGyver style (i.e. making it up as I go along, with whatever happens to be on hand).
First of all, I want to talk about the iPhone. When I first heard about it, I thought it was God's (or at least Steve Jobs') gift to motorcyclists. I can listen to my music AND answer my phone while riding. If I'm lost, I can pull over and use Google Maps to find my way and I can use the internet to find road suggestions/restaurants/campsites/repair shops/almost anything else.
Anyway, since January when I got an iPhone all my own, I've been thoroughly enjoying all the aforementioned things. However, like all things, it's not perfect. The 3/4'' jack for the headset means that most cell phone headsets won't work. You can use bluetooth headsets, but it lacks the protocol for stereo via bluetooth, making listening to music mediocre at best. It does come with a decent set of white earbuds with a built in microphone, and I've been getting by with that so far. The earbuds don't fit my ears particularly well though, and they tend to come loose on the road. The microphone has a built in button to answer/reject calls, pause and play your music, and skip tracks. The mic and the button both work fairly well, but it dangles down almost at your throat, making talking into it while riding less than effective.
So, now that the problems are clear, how do we remedy them, preferably without spending any cash? The first step was to replace the earbuds with something that won't come loose and move around on me.
I found this video, explaining a simple way to replace the earbuds without losing the functionality of the mic. The earbuds don't come apart quite as easily as they do in the video. It required a small screwdriver to pry them apart, but other than that it went fairly smoothly.
The next step was to find some replacement speakers. I had a set of larger over-the-ear headphones sitting in the back of a drawer. If I remember right they cost about $20 when I bought them, several years ago. I attached them to the ends of my iPhone headset and checked to make sure they worked. Success! I also adhered some velcro to the backs of the speakers to attach them to the inside of the helmet. The velcro turned out to not really be necessary, but it doesn't hurt.
Now that I had the new speakers ready to go, all I had to do was attach them to my helmet. As it turns out, the speakers fit perfectly into the ear space in the cheek pads on my HJC SyMax. I'm not sure what the little straps are intended for, but they do a great job of holding the speakers in place. The velcro helps to add just a little more security to them, but I really don't think they'd go anywhere without it.
After I snapped the cheek pads back in place, with the new speakers inside them, I attached a small piece of the hook side of the velcro to the back of the mic. The velcro holds it onto the liner inside the helmet. Keeping it up inside the helmet eliminated a lot of the wind noise, but it's still easy to access the button by reaching up inside from the bottom of the helmet with my left hand.
The final step was to use an awl to make a small hole in the padding running along the bottom of the helmet, in the back. I tucked the wire up inside the padding, and ran it out through the hole. It's not quite long enough to reach into my pants pocket, but as long as I keep my phone in the inner pocket on my jacket, it's long enough.
Once it was all together, I took a ride around the block and had someone call my phone to test it all out. The only part that's not perfect is the volume. I can hear it okay, but I'd like it to be just slightly louder. (Edit: After fiddling with the speakers a bit and moving them slightly farther forward, the volume issue is at least somewhat better. Just play with them a bit to fit your head.) The larger speakers are probably a little underpowered compared to the little earbuds they replaced, but they get the job done, and for the price (essentially nothing since I just used things from the junk drawer) they really can't be beat.
p.s The iPhone also allows me to take simple pictures like these without having to mess with my real camera gear, so expect to see a lot more photos for non ride report entries.
Update: See my review of a less homemade iPhone headset here.
I went to the annual medieval fair in Norman, OK last weekend. This is probably the first year in a decade that it hasn't been either pouring rain all weekend, or pouring rain for half the weekend, and nothing but swampy mud for the second half. Anyway, due to the unexpected nice weather, there seemed to be three times as many people attending this year. This, of course, meant that there were a lot more cars than parking spaces. People were patrolling the streets waiting for someone to pull out, lining up along neighborhood streets, and parking several blocks away. I, on the other hand, just pulled into this spot in the grass, along with several other bikes, right on the edge of the fair grounds. I was so pleased with myself that I snapped this picture with my phone before heading into the fair.
Honestly, if we had to we probably could have fit four or five more bikes in there too.
I took the opportunity a couple weeks ago to take a day and drive down highway 77 to Lake Murray. I had heard good things about the loop that circles the lake, and decided to give it a try. Highway 77 was a great road, running roughly parallel to I35, but twistier. I'd recommend it on it's own as a good day ride, even without the lake loop.
77 cuts straight through downtown Wynnewood, Oklahoma. The mainstreet still has the original brick-paved surface. Coincidentally, this picture was taken right around the time I lost 77 completely and went about 20 miles out of the way of my originally planned route. It all worked out though. We ended up passing through a very nice nature preserve on our way back.
We filled up the tank in Ardmore, just before reaching the lake. I wish I had a picture of the station. There was a woman in a little booth, and some very "retro" pumps. After you fill up, you just go over to the booth and tell the woman how much you put in and pay her. She even rounded it down to the dollar. Compared to the pay before you pump method at most stations today, it seemed very foreign.
When we got to the lake, we stopped in this little park area for a picnic lunch. Other than being a little windy, it was a perfect day for it.
Tamales and corn make a great meal for camping or picnicking if you bring a small camp stove. It might not look great, but it's easy, you don't have to carry much, it's hearty enough to fill you up during a long day, and it's delicious. Just take a can of creamed corn and a can of tamales, combine them in a pot, heat and eat.
After lunch, we got back on the bike for the ride around the lake. It had warmed up a little, and was really a perfect day for it.
Lake Murray is positioned just south of Oklahoma's Arbuckle mountains (or at least what we call mountains here in Oklahoma, but they're at least pretty) so it has some great rock formations.
Lake Murray State Park is the largest, and oldest, state park in Oklahoma. There are several interesting buildings on site, including a lighthouse that has been converted into a museum about the history of the park as well as the local wildlife.
